Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

voda
0
Worldsteel Expects Global Steel Demand to Dip by 2.3% in 2022

Strategic Research Institute
Published on :
20 Oct, 2022, 5:18 am

The World Steel Association in its latest Short Range Outlook for 2022 and 2023 has forecast that global steel demand will contract by 2.3% YoY in 2022 to reach 1,796.7 million tonnes after increasing by 2.8% YoY in 2021. In 2023 steel demand will see a recovery of 1.0% YoY to reach 1,814.7 million tonne. The current forecast represents a downward revision over the earlier forecast, reflecting the repercussion of persistently high inflation and rising interest rates globally. High inflation, monetary tightening, and China’s slowdown contributed to a difficult 2022, but infrastructure demand is expected to lift 2023 steel demand slightly.

CEO of Ternium & Chairman of the worldsteel Economics Committee Mr Máximo Vedoya said “The global economy is affected by persisting inflation, US monetary tightening, China’s economic deceleration, and the consequences of Russia’s invasion of Ukraine. High energy prices, rising interest rates, and falling confidence have led to a slowing in steel using sectors’ activities. As a result, our current forecast for global steel demand growth has been revised down compared to the previous one. The prospect for 2023 depends on the impact of tightening monetary policies and central banks’ ability to anchor inflation expectations. Particularly the EU outlook is subject to further downside risk due to the high inflation and the energy crisis that have been exacerbated by the Russia-Ukraine war.”

Worldsteel highlighted

1. The global economic environment has deteriorated significantly in 2022 as inflation risk fully materialised along with other major headwinds, namely the Russia-Ukraine war and China’s lockdowns. The Russia-Ukraine war exacerbated the inflationary pressure that was ignited by the post-lockdown supply and demand imbalances as the war disrupted energy and food supplies and intervened with the normalisation of supply chains. In particular in Europe, where dependence on Russian gas supply is high, economic activities, as well as confidence, are heavily affected by the energy crisis.

2. The Fed’s aggressive interest rate hikes and strong US dollar are propelling recession risks in the US and will have a ripple effect for the rest of the world through capital outflows in the emerging economies, increasing the financial stress of indebted countries and consumers. Rising interest rates and high inflation will affect investment and consumer spending, and will hurt steel-intensive sectors such as construction, machinery, and consumer durables.

3. Supply chain problems eased somewhat in 2022, but continued to constrain production activities as new disruptions have emerged. Assuming that the war will not end soon and China continues to maintain its strict COVID containment policy for the time being, supply bottlenecks will not dissipate completely, despite slowing demand.

Worldsteel concluded “Uncertainty remains elevated for the global economy and the balance of risks is largely skewed to the downside. Among those are the effect of monetary tightening, continuation of inflation, the direction of the Chinese economy and its COVID policy, the potential crisis of gas supply in Europe, and the aggravation of the Russian-Ukraine war with unexpected consequences.”
voda
0
Italian HRC prices align with northern Europe
192 Views

European hot rolled coil prices are reducing significantly due to low demand and order intake at both northern and southern European mills. Unusually, contract prices and offers are reported higher in southern European countries than in northern regions, Kallanish hears.

In Italy, both producers and service centres continue to report high stocks and a strong decline in consumption among their clients, of between 30% and 40% on the same period last year. Consumption, particularly from appliance and automotive manufacturers, is significantly reduced and not seen recovering until the end of the year.

Service centres say they are not in need of buying. Contracts are only happening back-to-back, while some interest is coming back to the market for imported material from Asian countries such as Taiwan, Vietnam, Korea and Japan. HRC offers from these countries are heard at $620-650/t cfr Italy, sources suggest. Turkish mills are quoting prices that are deemed too high by Italian buyers, in a wide range of $680-750/t cfr including import duty.

While some northern European producers are offering at €640-670/t base ex-works, Italian mills are trying to keep levels higher, offering at €680-730/t base ex-works. One producer is trying not to go below the level of €710-720/t base ex-works. However, buyers have assured Kallanish that this week, “nobody is paying a figure starting with a seven”, particularly re-rollers who tend to purchase lower-quality coil.

European steelmakers are quoting short lead times, some four weeks from the date of order.

Natalia Capra France
voda
0
British Steel Extends Range of Advance Structural Sections

Strategic Research Institute
Published on :
21 Oct, 2022, 5:15 am

British Steel has further enhanced its offering to the construction sector by extending its range of Advance® structural sections. Manufactured in the UK to carefully controlled standards, the Advance structural sections range provides greater design flexibility due to the inclusion of often difficult-to-find intermediary dimensions. The range has been extended by 71 additional beams and columns and is available in both standard grades and in British Steel’s premium S460M and weathering steel grades.

Initially developed to reflect structural design practice for CE-marked structural sections compliant with EU regulations, our new Advance range is also UKCA-marked in compliance with UK regulations on construction products.

British Steel started manufacturing weathering steel structural sections a little over a year ago. Self-protecting, durable and attractive, weathering steel is ideal for a whole range of outdoor structures in exposed locations including bridges, buildings and catenary gantries on railway lines.

The steel’s corrosion rate is so low that structures fabricated from unpainted weathering steel can achieve long lifespans – in some cases up to 120 years – with only minimal maintenance.

British Steel’s high-strength structural steel grade, S460M, is designed for use in multi-storey and high-rise buildings, as well as a wide range of other commercial and industrial uses. It provides the optimum balance between cost and weight, along with improved environmental performance.
voda
0
Baowu Acquires Controlling Stake in Xinyu Steel

Strategic Research Institute
Published on :
21 Oct, 2022, 5:17 am

Chinese steel giant Baowu has signed an agreement with Jiangxi Province-based State-owned Capital Operation Holding, according to which Capital Operation Holding will transfer 51% of equity in Jiangxi Province-based Chinese steelmaker Xinyu Iron & Steel to Baowu. After the transfer, China Baowu Group will hold 51% of equity in Xinyu Steel and become its controlling shareholder, while Capital Operation Holding will hold the remaining 49%

Xinsteel Group is located in Xinyu city in Jiangxi Province and has an annual crude steel capacity of 10 million tonnes.
voda
0
Nucor Reports Lower Earnings for Jul-Sep’22 Quarter

Strategic Research Institute
Published on :
21 Oct, 2022, 5:18 am

Nucor Corporation has announced quarterly consolidated net earnings of USD 1.69 billion for July-September quarter of 2022 as against consolidated net earnings of USD 2.56 billion for the second quarter of 2022 and USD 2.13 billion for the third quarter of 2021. Nucor's consolidated net sales decreased 11% to USD 10.50 billion in the third quarter of 2022 compared with USD 11.79 billion in the second quarter of 2022 and increased 2% compared with USD 10.31 billion in the third quarter of 2021.

Total steel mill shipments in the third quarter of 2022 decreased 9% as compared to the second quarter of 2022 and decreased 10% as compared to the third quarter of 2021. Steel mill shipments to internal customers represented 22% of total steel mill shipments in the third quarter of 2022, compared with 22% in the second quarter of 2022 and 21% in the third quarter of 2021. Downstream steel product shipments to outside customers in the third quarter of 2022 decreased 2% from the second quarter of 2022 and decreased 1% compared to the third quarter of 2021. A total of 6.415 million tons were shipped to outside customers in the third quarter of 2022

Average sales price per ton in the third quarter of 2022 decreased 3% compared with the second quarter of 2022 and increased 14% compared with the third quarter of 2021.

Nucor said, “We expect fourth quarter of 2022 earnings to be decreased from the third quarter of 2022. In the steel mills segment, we expect considerably lower earnings in the fourth quarter of 2022 as compared to the third quarter of 2022 due to lower average selling prices and lower volumes, with the largest decrease in profitability expected at our sheet mills. The steel products segment is expected to have another strong quarter in the fourth quarter of 2022, but the segment's profitability is anticipated to decrease from the third quarter of 2022 primarily due to typical seasonality experienced in the fourth quarter. The raw materials segment is expected to have significantly decreased earnings in the fourth quarter of 2022 as compared to the third quarter of 2022 due to decreased selling prices for raw materials.”
voda
0
SMS Bags Award for Supply Chain Management for BOXBAY Storage

Strategic Research Institute
Published on :
21 Oct, 2022, 5:19 am

SMS group was presented with the German Award for Supply Chain Management for its latest BOXBAY logistics technology at a ceremony held as part of the International Supply Chain Conference. BOXBAY offers an innovative solution to some of the key challenges in container port logistics. The system is a real game changer for ports of the future, as it combines economic goals with environmental targets.

With BOXBAY, the containers are stacked up to eleven levels high in a fully automated high-bay storage system. This allows direct access to every single container. At the same time, BOXBAY can offer up to three times more capacity and efficiency compared to conventional storage systems, where containers often have to be reshuffled several times. Thanks to full automation and digitalization, the quayside transshipment speed can be increased by up to 20 percent – a major economic advantage for the very cost-intensive container shipping sector. The photovoltaic system on the roof of the storage system means that BOXBAY can also be operated in a CO2-neutral way.

SMS originally developed the BOXBAY high-bay storage system to handle metal coils that can weigh up to 40 tons. This technology, which has proven itself in the metals industry, has been successfully further developed by SMS for port logistics.

In January 2021, a first facility was put into operation in Dubai. Up to the end of June 2022, 150,000 container movements were carried out under realistic operating conditions and verified the market maturity of the system. BOXBAY is already being put to the test by leading global port operators. Several projects are currently in the design, layout, or budgeting phase.
voda
0
Worldsteel Expects Expects High Growth in India & ASEAN

Strategic Research Institute
Published on :
21 Oct, 2022, 5:21 am

The World Steel Association in its latest Short Range Outlook for 2022 and 2023 said that “Many developing economies, especially energy-importing ones, are experiencing more acute inflation and monetary tightening cycles that started ahead of the developed economies. The construction sector is affected by high inflation, either directly through high interest rates and materials costs, or reduced government budget space for infrastructure projects due to spending on inflation relief measures. Still, the fast-growing Asian developing economies like India and ASEAN will maintain high growth, supported by the structural strength of the domestic economy. Despite global headwinds, India’s steel demand will show high growth on the back of strong urban consumption and infrastructure spending, which will also drive demand for capital goods and automobiles among other things.”

In the ASEAN region, steel demand saw a slow start of recovery from the pandemic, with the recovery of construction lagging. However, in 2022, the region’s steel demand has been showing strong growth as governments are pushing for infrastructure projects. Particularly strong growth in steel demand is foreseen in Malaysia and The Philippines.

On the other hand, the countries in South and Central America will see a major deceleration in steel demand as the region faces challenges from a high inflation environment. Besides high inflation and rising interest rates domestically, US monetary tightening will put additional pressure on financial markets. Following an exceptional rebound in 2021, steel demand in many South and Central American countries will see a contraction in 2022, with significant destocking and slowing construction.

In the MENA region, steel demand remains resilient owing to the oil-exporting countries benefitting from high oil prices and mega infrastructure projects in Egypt. However, high oil prices have not led to a major increase in new construction projects in the GCC countries as governments are trying to build up fiscal buffers.

In Turkey, the lira’s depreciation and high inflation are hurting its construction activities, leading to a contraction of steel demand in 2022 and only a limited rebound in 2023.

Despite heavy sanctions imposed on Russia, steel demand is expected to contract less than what was forecast at the beginning of the war, mainly due to high oil prices and government support measures on construction. However, the automobile and machinery sectors have seen a deep contraction due to their high dependence on imported parts and components. In 2023, steel demand is expected to see a deeper contraction as the sanctions become more biting over time. Steel demand in war-ridden Ukraine contracted more than 50% in 2022, but a partial recovery is expected in 2023 on the back of reconstruction activities.
voda
0
CD Waelzholz to use Thyssenkrupp’s bluemint Steel

Strategic Research Institute
Published on :
21 Oct, 2022, 5:23 am

Demand for CO2-reduced steel from thyssenkrupp is continuing to rise. CD Wälzholz from Hagen will in the future use high-precision hot strip made of climat -friendly steel from thyssenkrupp Hohenlimburg for the production of special materials. The Waelzholz Group and thyssenkrupp Hohenlimburg have signed a memorandum of understanding for the supply of climate-friendly bluemint® Steel from 2023 onward.

Waelzholz, a long-standing strategic partner of thyssenkrupp Hohenlimburg, uses high-precision hot strip for the production of cold-rolled special materials for high-quality applications in the automotive, energy and industrial sectors. The quantities of CO2-reduced steel purchased by Waelzholz are set to increase step by step up to 2030. The steel will be supplied by thyssenkrupp Hohenlimburg as unpickled and pickled precision strip in the entire product range and up to a width of 720 mm. With bluemint Steel, thyssenkrupp Hohenlimburg is already offering steel products with around 70% lower CO2 intensity.

Waelzholz, a family-owned SME, produces high-quality cold-rolled steel strip and profiles for customers from the automotive or industrial sector as well as the energy and capital goods sectors. At locations in Europe, North and South America, and in Asia, the technology leader with 2,300 employees produces 780,000 metric tons of high-quality steel materials annually. Waelzholz has set up an ambitious Green Steel Roadmap with various projects to drastically reduce the CO2 emissions of its own products and production. Since the largest part of Waelzholz's carbon footprint is caused by emissions from the input stock chain, it is crucial for the company to reduce this CO2 content.
voda
0
Primetals & JSW Dolvi Sign Large Maintenance Service Contract

Strategic Research Institute
Published on :
21 Oct, 2022, 5:24 am

JSW Steel has placed an order with Primetals Technologies for comprehensive maintenance services, including spare parts supply, for its new continuous casters at the steel plant in Dolvi in Maharashtra province, India. The slab casters have a production capacity between 4 and 4.5 million tonnes of steel per year. Aimed at increasing equipment lifetime and improving product quality, this technology-based service contract includes comprehensive state-of-the-art maintenance services. Primetals Technologies will provide technical experts as well as skilled workers, supply spare parts, and repair slab caster components. The initial term of the contract is three years, with an option for an extension.

JSW Dolvi Vice President Mr Amit Sakar said “To ensure continuous production and to further improve product quality, we decided to collaborate with a reliable supplier in the metallurgical services business. We are confident that the productivity of the plant and the quality of the steel produced at the Dolvi steel plant will set new industry benchmarks.”

In 2017, Primetals Technologies was awarded an order from JSW for two continuous slab casters and a hot rolling mill at JSW’s Maharashtra plant. The slab casters were implemented in 2021. One of India’s leading steel producers, JSW Steel had an annual production capacity of about 18 million tonnes of steel in 2021.
voda
0
Worldsteel Expects Steel Demand to fall in Advanced Economies

Strategic Research Institute
Published on :
21 Oct, 2022, 5:25 am

The World Steel Association in its latest Short Range Outlook for 2022 and 2023 said that steel demand in the developed world will fall by 1.7% and recover by 0.2% in 2022 and 2023 respectively, after recovering by 16.4% in 2021 from the pandemic dip of 12.3%. It said “Steel demand recovery in developed economies saw a major setback in 2022 due to sustained inflation and lasting supply side bottlenecks. The war in Ukraine has provided further impetus to inflation and supply chain issues. In particular, the EU is facing dire economic conditions with high inflation and the energy crisis. Sentiment is dwindling and industrial activities are cooling sharply toward a decline as high energy prices are forcing factory shutdowns.”

Steel demand in the EU is expected to contract by 3.5% in 2022. With immediate improvement in the gas supply situation not in sight, steel demand in the EU will continue to contract in 2023 with a significant downside risk in case of harsh winter weather or further disruptions to energy supplies. Financial risks stemming from high public debts and slow growth in China pose further downside risks for the EU. There are also possible long-term consequences for the structure of the economy and hence steel demand if the economic constraints continue at the current level. On the other hand, if the Russia-Ukraine war ends sooner than expected, there is an upside potential.

The sustained and strong recovery of the US economy from the pandemic shock is coming to an end as the Fed pursues aggressive interest hikes to contain inflation. Manufacturing activities are expected to cool sharply thanks to the weak economic environment, strong dollar and shift of spending from goods to services. However, the automotive sector is expected to maintain the positive momentum on the back of pent-up demand and easing of supply chain constraints. The construction sector will struggle due to the easing of the housing boom and the delayed recovery of the non-residential sector on the back of rising materials cost and high interest rates. The new Infrastructure Law will however sharply boost infrastructure investment, and rising energy sector investment will support growth in steel demand despite a weakening economy. Overall, US steel demand is not expected to turn into a contraction.

The recovery of steel demand in Japan weakened as rising materials cost and labour shortages have led to construction delays. However, with the support of the non-residential construction and machinery sectors, steel demand will continue its moderate recovery in 2022. Growth in the automotive industry with easing of supply chain constraints will allow for a continued recovery of steel demand in 2023.

The steel demand outlook for South Korea has worsened and is expected to decline in 2022 due to contracting facility investment and construction. Recovery in 2023 will be led by easing of auto supply chain bottlenecks and an improved outlook for ship deliveries and construction. However, recovery of manufacturing will be limited due to the weak global economy.

Both Japan and Korea face downside risks from the worsening global economic outlook as their steel using sectors have a high exposure to exports.
voda
0
Anglo American & Thyssenkrupp Join Hands for Green Steel

Strategic Research Institute
Published on :
21 Oct, 2022, 5:28 am

Anglo American and thyssenkrupp Steel have signed a memorandum of understanding to collaborate on developing new pathways for the decarbonization of steelmaking. The collaboration will focus on joint research to accelerate the development of high-quality input stock for lower carbon steel production, using both conventional blast furnace and direct reduction iron. Thyssenkrupp Steel’s Chief Technology Officer Dr Arnd Köfler said “We want to decarbonize the steel value chain inside and outside our plant boundaries. We are setting up our own production with low-CO2 emissions through a combination of direct reduction plants with innovative melters. In addition, we are working with many partners to make steel lower in CO2 across the board. We are therefore very pleased to be working with Anglo American to explore ways in which we can use high-grade iron ore in the production process in the best way possible for reducing emissions."

As part of its tkH2Steel transformation concept, thyssenkrupp Steel has developed an innovative and technologically leading concept for decarbonizing steel production. The coal-based blast furnaces will be replaced by hydrogen-powered direct reduction equipment. The iron produced there, which will have been directly reduced with hydrogen, will be liquefied for the first time in downstream, specially developed melting units to produce high-quality hot metal. All subsequent production steps can take place in the existing plant structure, including the steel mills, thus enabling an efficient transformation. In the new plant concept, the entire premium product portfolio can thus be produced with low CO2 emissions without compromising on quality.

tkH2Steel thus represents an efficient and exemplary path towards climate-friendly steel production. Recently thyssenkrupp released appropriate equity funds for the construction of the first direct reduction plant at the Duisburg site, laying the foundations for investments of more than two billion euros for the green transformation. The state government of North Rhine-Westphalia intends to fund the project with an amount in the mid three-digit millions. The first direct reduction plant in Duisburg is scheduled to come on stream in 2026.
voda
0
ESP, EUROFER & industialAll Seek Action to Safeguard Steel Sector

Strategic Research Institute
Published on :
21 Oct, 2022, 5:30 am

The European Social Partners, the European Steel Association EUROFER and industriAll European Trade Union have called for urgent action to safeguard the European steel sector and protect these high skilled, quality jobs in Europe while also working towards a carbon-lean, environmentally responsible. They said “European steel is at the heart of European industry and is responsible for 310,000 direct, and 2.2 million indirect jobs, in the EU. The triple energy, raw material and cost of living crises means that strong social dialogue and support at national and European level is more important than ever to safeguard the sector and protect jobs. With energy costs around seven times higher than before the crisis and carbon at 70 EUR per tonne, the European steel sector is buckling under huge bills, much higher than in those in other steel producing regions.”

They said “The illegal invasion of Ukraine, which exasperated the energy crisis, has also led to a massive decrease or stoppage of traditional raw materials supply from Russia and Ukraine, such as iron ore, requiring European companies sourcing from other destinations at much higher costs. Furthermore, workers and citizens are suffering with EU inflation at 10% in September 2022.”

They added “The twin green and digital transitions have never been more challenging, and additional investment and support will be needed to ensure that these transitions are a success with no steel worker or region being left behind.”

They have called on companies to keep investing in both their plants and their people, and on public authorities to swiftly support industrial decarbonisation projects and the related energy infrastructure, and to develop the appropriate regulatory framework creating lead markets for green steel and securing effective carbon leakage protection as set out earlier

1. Demand an EU fund to support national short-term work schemes, via the implementation of SURE 2.0, to keep companies afloat with strong social conditionality in place.

2. Insist on implementing short-term emergency solutions that limit the costs and prices of gas and electricity while also ensuring security of supply.

3. Support an ambitious, and forward-looking, revision of the EU’s Waste Shipments Regulation noting the importance of scrap steel for decarbonisation and the circular economy.

4. Insist on EU action to ensure fair trade and ask the EU to consider emergency measures with regard to imports, stressing the enormous energy price/cost distortion at the detriment of EU steel and workers, fierce global competition and increased global excess capacity, with many non-European regions much less impacted by the triple crises.

5. Call on all stakeholders to work together to ensure a Just Transition for any steel worker or steel region impacted by the green or digital transition.
voda
0
JSW’s Przyjazn Coking Plant Returns to Production Capacity

Strategic Research Institute
Published on :
21 Oct, 2022, 6:01 am

Polish coal miner JSW announced that the Przyjazn coking plant in Dabrowa Górnicza restores production. After the incident on September 22, the plant built two alternative battery carburizing points, which enables the commissioning of the remaining equipment in the coal transport process line. The organizational system for the carburizing of coal towers in the coking plant was also changed. As a result, the plant returns to its pre-event production capacity, allowing it to fully meet its contractual obligations. The test results indicate that the currently produced coke achieves the contractual quality parameters.

As a result of the explosion, one employee of the coking plant died, and four people are still in the hospital.
voda
0
Global economic normalisation expected by end-2024: conference
142 Views

A normalisation of the global economic scenario could take place in the coming 18-24 months, according to doctor Osman Cevdet Akcay, a senior economist speaking at the opening of the Kallanish Flat Steel conference held in Istanbul this week.

Currently global economies are being strongly affected by inflation, but the latest decision of the US Federal Reserve to tackle inflation even at the cost of significantly slowing down economic growth (or even initiating a recession) has been accepted by international policy makers and is expected to have positive effects in 2024. Similarly the European Central Bank authorities are looking to tackle inflation despite a recession looming.

Dr Cevdet believes this position in favour of deflation against economic growth is going to be beneficial. The recent outlooks point to record levels for inflation levels in 2022, but a slowdown in inflation should already be achieved in 2023 (excluding for China).

He added that for developed economies the end of 2022 and 2023 wil be very bumpy, but a normalisation is in sight. He noted also that some countries such as India will have a smoother ride during the next months, as will the Asia-5 countries.

“The Fed and the ECB want to limit and reduce inflation at whatever costs and the market has finally understood we need to go though recession to deflate. Having said that, I remain relatively positive toward a normalisation in the next 18-24 months; if a truce is agreed between Russia and Ukraine I would even become very positive,” Dr Cevdet noted.

On the exchange rate side, Dr Cevdet said “I would bet on the Dollar strength.”

Emanuele Norsa Italy
voda
0
Chinese billet returns to ASEAN
298 Views

The reappearance of Chinese billet caused a stir in Southeast Asia last week, Kallanish notes. Like before, the latest Chinese billet offers are the most competitive in the market and, if supply is prolonged, could bring down prices even quicker.

Offers of Chinese billet for November/December shipment were heard at $520-530/tonne cfr Philippines during the last two days of the week, trading sources say. Several traders heard that a cargo of blast furnace 150mm 5sp grade billet was ordered on Friday at $520/t cfr. But others are unaware of this deal taking place.

Some traders say these sellers are offering at too-low prices because they will not pay the full Chinese VAT on the exports. “The offers really shocked me because it is crazy that they dare to take the risk,” a Chinese trader says. “It is legal to export billet but it is illegal to not pay the full VAT,” he adds. Unlike in the past, the billet will not be declared as alloy square bar, he points out. “The non-payment of the full VAT can apply to any steel product, not only for billet,” he adds.

A regional trader observes: “There are many risks involved.” He would have thought that Chinese exporters would partake in such deals only if there are sufficient gains. Chinese billet offers are also available in Indonesia, local market sources report. A Jakarta mill manager heard 1sp grade billet from China sold at $515/t cfr Indonesia. He was told the seller of the speculative trade is using Chinese futures to hedge.

The Manila market saw regional billet prices slip over the past week. The regional market was quiet as the Chinese Communist Party (CCP) congress did not provide any boost to the Chinese economy or steel market.

Offers for blast furnace 120/130/150mm 5sp grade billet from Malaysia, Indonesia and Vietnam for November/December shipment are prevailing at $525-535/t cfr Manila, inform trading sources. An Indonesian mill is offering December-shipment 130mm 3sp billet at $525/t cfr and 5sp at $530/t cfr. Offers for 130mm 5sp blast furnace regional billet were at $535-545/t on 14 October.

Kallanish assessed 5sp/ps or Q275 120/125/130mm square billet at $520-525/t cfr Manila, down $10 on week.

Chinese billet will continue to flow into the region unless there are changes to foreign exchange rates and iron ore prices, or positive news to conclude the CCP meeting, a regional trader said on Friday.

Anna Low Singapore
voda
0
Rio Tinto Releases Third Quarter Production Results

By Strategic Research Institute on Oct 23, 2022 07:17 am

Rio Tinto Chief Executive Mr Jakob Stausholm said “Delivering the full potential of our assets remains a priority: production improved versus the prior quarter across most of our sites, particularly where we have implemented the Rio Tinto Safe Production System. We progressed our excel in development objective, commissioning some major projects and advancing the next tranche of Pilbara mines, agreeing to enter a joint venture with Baowu to develop Western Range and modernising the joint venture covering the Rhodes Ridge project in the East Pilbara, unlocking a pathway to develop this significant, high quality resource. We also approved growth capital for underground mining at Kennecott, early works funding at Rincon Lithium and continue to progress Oyu Tolgoi. Our proposal to take Turquoise Hill Resources private has unanimous support of the Turquoise Hill Board who have recommended shareholders vote in favour of the transaction.

He added “We continue to deliver our strategy with decarbonisation at its centre. Last week we announced a partnership with the Government of Canada to invest up to CAD 737 million over eight years to decarbonise our Rio Tinto Fer et Titane operations in Québec, and to position the business as a centre of excellence for critical minerals processing.”

Uly-September 2022 Quarter

Pilbara iron ore shipments (100% basis) - 82.9 million tonne, down 1% YoY

Pilbara iron ore production (100% basis) - 84.3 million tonne, up 1% YoY

Bauxite - 13.7 million tonne, down 2% YoY

Aluminium - 759 KT, down 2% YoY

Mined copper - 138 KT, up 10% YoY

Titanium dioxide slag – 310 KT, up 48% YoY

IOC iron ore pellets and concentrate - 2.8 million tonne, up 28% YoY
voda
0
Technip Energies & MetGen to Industrialize METNIN Technology

By Strategic Research Institute on Oct 23, 2022 07:51 am

Technip Energies and MetGen have announced a collaboration for the industrialization of METNIN® technology for the valorization of lignin. Lignin is a high-volume waste stream of biorefineries that is currently burned.

METNIN is an enzymatic process technology that enables the fractionation of lignin from lignocellulosic feedstocks to produce various renewable bio-products. Technip Energies and MetGen have signed a Memorandum of Understanding to jointly bring a standardized solution for lignin refining to the global market.

MetGen designs and markets novel enzymatic solutions for the most challenging of industrial conditions to address our customer’s specific challenges. MetGen was founded in 2008 and is based in Kaarina, Finland. MetGen’s enzymes METZYME are industrial, highly-active, natural catalysts that accelerate chemical reactions and company uses advances in genetic engineering and microbiology to adapt enzymes to harsh industrial conditions and to handle a variety of lignocellulosic substrates. MetGen aims to be a widely recognized supplier of industrial enzymes, significantly contributing to the economics and sustainability of process industries such as biofuels and renewable chemicals. MetGen’s competitive advantage is in tailoring or adapting enzymes to meet customer’s specific needs.
voda
0
Vale’s Iron Ore Production in Q3 Recovers by 21% QoQ

By Strategic Research Institute on Oct 24, 2022 10:04 am

Brazilian mining giant Vale said that its iron ore production increased 21% QoQ to 89.7 million tonnes in Q3 of 2022, reflecting the dry season in the Northern System and higher third-party ore purchases and production in the Southern System.

Sales of iron ore fines and pellets increased 6.0% QoQ to 77.6 million tonnes. The usual production-to-sales gap in Q3 resulted from transiting inventories across the supply chain, which Vale expects to revert in the next quarter, depending on market conditions.

Nickel production increased 51% q/q to 51.8 kt, as refineries came back from a maintenance period in 2Q22 and the conclusion of the furnace 4 rebuild at PTVI. Nickel sales increased 13% q/q, but lagged production due to sales commitments in 4Q22 during scheduled maintenance, low availability of containerships impacting Onça Puma and shipping congestion in the UK in 3Q22.

Copper production increased 33% q/q to 74.3 kt, following extended maintenance at Sossego mill in the first half of the year, better plant performance at Salobo in the quarter and the recovery of copper from copper precipitate holding facilities in North Atlantic operations. Copper sales were up 37% q/q, in line with higher production.

Uly-September 2022 Quarter

Iron ore - 89,701 million tonne, up 1.1% YoY

Pellets - 8,256 million tonne, down 1.0% YoY

Nickel - 51.8 million tonne, up 71.5% YoY

Copper - 74.3 million tonne, down 89.3% YoY
voda
0
BHP Expects Global Macro-Economic Uncertainty in Short Term

By Strategic Research Institute on Oct 24, 2022 10:03 am

Mining giant BHP’s Chief Executive Officer Mr Mike Henry said “We have started the new financial year strongly, achieving safe and reliable operating performance. The first quarter included significant planned major maintenance in Western Australia Iron Ore, BHP Mitsubishi Alliance and Olympic Dam. Copper production was up nine per cent on the same quarter last year, with strong concentrator throughput at Escondida and record quarterly anode production at Olympic Dam. WAIO continued to perform strongly, with production up by 3% relative to the same period last year, and we managed through substantial rainfall and labour constraints in our coal assets with production only down marginally year on year. Our full year production and unit cost guidance is unchanged.”

The South Flank iron ore ramp-up and the Jansen potash project are tracking well, with work ongoing to bring forward first production from Jansen Stage 1 and accelerate Jansen Stage 2.

During the quarter, BHP struck a new agreement to supply our WAIO port facilities with renewable electricity, which is expected to halve GHG emissions from the electricity used, signed an MoU with India’s Tata Steel to collaborate on lower GHG emission steelmaking and announced a partnership with Pan Pacific Copper to reduce GHG emissions from maritime transportation, as we take further action to reduce GHG emissions from our operations and support decarbonisation of our suppliers and customers.

Mr Henry said “We expect global macro-economic uncertainty in the short term to continue to affect supply chains, energy costs, labour markets and equipment and materials availability. BHP remains well positioned, with a portfolio and balance sheet to withstand external challenges and a strategy positioned to benefit from the global mega-trends of decarbonisation and electrification.”
voda
0
OMK Launches New Thermal Furnace at Bashkortostan Plant

Strategic Research Institute
Published on :
25 Oct, 2022, 3:53 am

Russian pipe maker United Metallurgical Company OMK has launched a modern induction furnace for casting iron at its valve plant in Blagoveshchensk in Bashkortostan. Investments amounted to 10 million rubles. With the launch of the equipment, the OMK plant will be able to increase production volumes. The furnace is equipped with two crucibles, special containers made of refractory material. Crucible melting of metal makes it possible to obtain various high-alloy steels. The new furnace is equipped with an automated complex for ultra-precise heat treatment of castings, the heating temperature adjustment step is 5 degrees Celsius.

It is important that the equipment fully complies with high environmental standards: due to induction, which does not require gas cleaning, the environmental impact is minimal. In addition, metal waste (i.e., loss of metal mass after heating) in an induction furnace is five times lower than in an arc furnace, and is only 2%.

The modernization of heat treatment at plant will allow OMK to master new types of products that are in demand on the market. The use of environmentally friendly technology will ensure a minimum load on the Blagoveshchensk air from metallurgical production, while maintaining the high quality characteristics of the products.
35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 ... 1755 1756 1757 1758 1759 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Detail

Vertraagd 24 apr 2024 17:35
Koers 23,640
Verschil +0,170 (+0,72%)
Hoog 23,950
Laag 23,550
Volume 2.185.626
Volume gemiddeld 2.462.006
Volume gisteren 3.800.729