Koffiekamer « Terug naar discussie overzicht

3D printing

6.208 Posts, Pagina: « 1 2 3 4 5 6 ... 285 286 287 288 289 290 291 292 293 294 295 ... 307 308 309 310 311 » | Laatste
nobahamas
0
Pyro Green-Gas (formerly known as Air Science Technologies Inc.), has received a milestone payment of approximately $2.5MM under an existing $9.3MM contract with Tata Steel (the “Client”), one of the world’s top diversified steel producers with commercial operations worldwide. The balance under this contract, of approximately $3MM, is expected to be fully received within the next nine months.

Under this contract, Pyro Green-Gas has the mandate to supply a coke oven gas purification and hydrogen production processes that, if successful, will purify coke oven gas and extract a hydrogen of extremely high purity (99.999%) and value, with significant environmental benefits.
R dayhigh
0
quote:

Flat Tyre schreef op 28 oktober 2021 11:36:

woordje uitleg van de CEO

agoracom.com/ir/PyroGenesisCanada/for...
prima uitleg, rationeel denkend is was dit al duidelijk, maar met een koers die blokje voor blokje lager gezet wordt goed om weer eens te herhalen. pyro staat er prachtig voor, huidige koers is een schim van wat het zal worden.

zojuist weer een nieuw PB:

PyroGenesis Selected to Provide $9.2 Million Land-Based System to Destroy PFAS; An Emerging Hazardous Waste Stream
ceo.ca/@nasdaq/pyrogenesis-selected-t...
Flat Tyre
1
kunnen ze in Zwijndrecht ook gebruiken

PyroGenesis Selected to Provide $9.2 Million Land-Based System to Destroy PFAS;
finance.yahoo.com/news/pyrogenesis-se...

na de crash
0
Ja best een mooi contract, ik had geen idee dat ze dit konden. PFAS is een wereldwijd probleem waarvan de ernst nog maar geleidelijk aan begint door te dringen.

In Zwijndrecht kijkt 3M aan tegen een potentiële sluiting nu blijkt dat 90% van de omwonenden gevaarlijk hoge bloedwaarden hebben.
Bob de Bouwer 59
0
quote:

Flat Tyre schreef op 28 oktober 2021 16:47:

kunnen ze in Zwijndrecht ook gebruiken

PyroGenesis Selected to Provide $9.2 Million Land-Based System to Destroy PFAS;
finance.yahoo.com/news/pyrogenesis-se...

Pyro als een speer vandaag. +9%

Maar ik zit te wachten op een koers van $4,50. dan gaan ze eruit om later weer bij te kopen onder de 4

afwachte.....
haas
0
goedenavond;

MTLS $ 24,60 + 11% (12 mnd range $18-$87)
===========
Q3 2021:Financial Highlights:

Q3 2021 revenue increased 28% YOY to 52,195 kEUR and 2.9% above Q2 2021
• Q3 2021 Adjusted EBITDA rose 62% to 9,739 kEUR YOY
• Adjusted EBITDA margin increased to 18.7%
• Q3 2021 Net result grew to 8,652 kEUR from (282) kEUR in Q3 2020
• 15 EUR-ct. Earnings per share

Materialise NV winst en omzet hoger dan voorspeld
4 uur geleden (28.10.2021 14:51)

Investing.com - Materialise NV rapporteerde op donderdag voor het derde kwartaal een winst die hoger is dan verwacht en een omzet die hoger is dan de voorspellingen.

Het bedrijf meldt een winst per aandeel van €0,17 met een omzet van €60,43M. Analisten geraadpleegd door Investing.com voorzagen een winst per aandeel van €0,0279 met een omzet van €48,38M.

Materialise NV aandelen stegen 6,24% en handelden op €23,51 in de voorbeurshandel na de bekendmaking van de resultaten.

Dit jaar zijn Materialise NV aandelen vooralsnog 20.31% hoger uitgekomen, waardoor ze beter presteren dan de Nasdaq die 18% hoger is uitgekomen in het lopende jaar.

static.seekingalpha.com/uploads/sa_pr...
Bob de Bouwer 59
0
even ter toelichting een stukje uit het yahoo artikel.

Techniek heeft de toekomst was en is de slogan !!

PyroGenesis Canada Inc. (http://pyrogenesis.com) (TSX: PYR) (NASDAQ: PYR) (FRA: 8PY), a high-tech company (hereinafter referred to as the “Company” or “PyroGenesis”), that designs, develops, manufactures and commercializes advanced plasma processes and sustainable solutions to reduce greenhouse gases (GHG) and address environmental pollutants, is pleased to announce today that it has been selected to provide a $9.2MM land-based system to destroy Perfluoroalkyl and Polyfluoroalkyl Substances (“PFAS”) . The Client is a large operator of public water systems, whose name will remain confidential for competitive reasons.
R dayhigh
0
Onderstaand een post op stockhouse.
stockhouse.com/companies/bullboard/t....

in het achterhoofd houdend dat dit een opsomming is van zaken die in de pen zitten en niet allen 100% concreet.
desondanks niet minder indrukwekkend wat het potentieel is. huidige koers zou werkelijk een lachertje zijn als alles uitpakt.
ps. ik heb niet alles ge "fact checked" in de pb's.

Pyro - $1.2 Billion Revenue 12-24 Months Forecast Update

Contract backlog (End of Q2/21)

32 million (End of Q2/21)


$65 million contracts signing confirmed by Peter, next 6 months Oct /21

$1.8 million – Medical Waste Torch Contract
$6 million – Client B Torch Contract
$5 million - Biogas Purification System Contract
$0.267 million – Tata Contract
$1.15 million – Ceramic Powder Processing System
$9.2 million – Land Based Destruction System
$41.433 million still outstanding contract to be announced


Torch Contracts – Estimated Revenue $940.95 million next 2 years

Client A
$1.8 million – One Torch contract
$0.55 million – Maintenance and service contract over 2 years
$54 million – Requested quote for 36 units
$19.8 million – Maintenance 2 years at cost of $275 k/torch/year. However, the torch will last 20 to 25 years. More spare parts and service revenue
$300 million – Over 500 Torch is required, Contract 500 units about $750 Million assume over 5 years or $300 Million for the next 2 years.
$110 million - Maintenance over 2 years


Client B
$6 million – Four Torch contract
$2.2 million – Maintenance and service contract over 2 years
$78 million – 130 Torch is required at cost of $195 million, I assume it will take 5 years.
$19.8 million – Client B Torch maintenance 2 years at cost of $275 k/torch/year. However, the torch will last 20 to 25 years. More spare parts and service revenue

Client C
$210 million – Estimated 350 Torch is required over 5 years. Next 2 years estimated requirements of 140 Torch. Today’s interview by Peter stated that Client A, B and C requires over 1000 Torches
$77 million – Maintenance cost over 2 years

Medical Waste Contract
$1.8 million – Two torch for medical waste


Future Torch Contracts
$30 million - Algoma Steel 8-10 burners estimated
$30 million - Dofasco Steel (Hamilton) 8-10 burners estimated

Cost Analysis
$250 k Annual cost saving (report from Sweden)
$280 k Annual CO2 saving/grant (2021 based on Canada Government)
$530 k Annual cost saving/torch
Payback about 3 years/torch


Dross Contract – Estimated Revenue of $130 million over the next 2 years

$40 million - Bidding for Dross contract above average change to win.
$10 million – Spare parts over 2 years
$40 million - Additional contract in progress for $40 million on 2nd dross.
$10 million – Spare parts over 2 years
$15 million of LOI announcement on Dross contract
$5 million – Spare parts over 2 years
Aluminum Dross Residues Conversion - $10 million estimate


Waste Destruction System - $47.6 million over the next 2 years
Land base system
$9.2 million land-based system announced, plus two additional units $18.4 million possible in the near future


Powder Contract - Estimated Revenue of $15 million over the next 2 years

$5 million - Powder contract unknown, assume $5 million for Auto/Aerospace


Pyro Green Gas - Estimated Revenue of $20.267 million over the next 2 years

Purchasing Air Science Technologies Inc - $5 million in revenue
Over 12.8 million in revenue backlog
Biogas Purification System Contract - $5 million
Tata contract $0.267 million


HPQ Investment - Estimated Revenue of $16.15 million over the next 2 years

Nano Reactor (HPQ Alliance, Battery and EV) revenue unknown, assume $5 million

HPQ Nano Reactor (Fumed Silica for medical devises), estimated $5 million – potential addressable $2 billion market/year

Research Grants $5 million estimate

Research Grants $1.15 million Ceramic Powder


Just add the number $1,226.967 Million in revenue expected as of Oct 28/21. Next 12 to 24 Months.
Cash on hand around $18 Million end of Q2/21
Revenue Q1/21 – $6 Million
Revenue Q2/21 - $8.3 Million
mjmj
0
Je vergeet Tata steel/Hoogovens: pilot met torch... (o nee toch niet ze denken erover om CO2 op te slaan, helemaal achterhaald maar toch niet iedereen kan het slimste jongetje in de klas zijn)
mjmj
1
Recent post van PP als antwoord op de vraag waarom hij aandelen heeft verkocht:

Dear All,

I am writing to you this morning because of an increased volume of inquiries questioning my selling shares while the price is decreasing (and in the face of strong short selling).

Apparently, the sky is falling….

To all the chicken littles out there: pop a chill pill, pull up a chair, and listen. (Just so I am clear: I know there are those of you with legitimate concerns, and have been huge supporters of the Company, and to some degree get it and just need comfort. I don’t consider you Chicken Littles. The Chicken Littles I am talking about are those that react without thinking and without asking questions, who play into the shorts and who probably, when you think about it, should reconsider investing in any company)

Before you react you have to ask yourself two basic questions in such situations because those with other agendas would like you to believe that such selling is a signal the stock has peaked/no good news is coming out (after all what insider would sell if good news was coming?....ah maybe an insider that has warrants/options expiring and has no choice ???? lol…).

The two basic questions are, in my humble opinion, the following:

1) Why is the selling taking place and what is the effect on the holdings of the person selling?

2) How much is being sold relative to the overall volume?

With respect to the first question, I have been very clear that I have been selling predominately to exercise options/warrants and pay huge taxes on doing that. So basically, I sell shares to be able to exercise expiring warrants/options and pay taxes. To put this in perspective I (and when I say “I” I am referring to anyone that the regulators deem are associated with me in such a way that requires reporting) have sold just over 3MM shares and added over 8MM shares since January 1st 2021 for a net gain of over 5MM shares. You do the math. I could have sold 3MM shares and pocketed the money, but no, instead I increased my total shares owned. So, I am not selling to “get out of Dodge” as some shorts would have you believe. I am selling and exercising options and warrants, and as a result I am adding to the company’s cash on hand. The net result is that, since January 1st I have increased the number of shares I own in the company by 8.12%. +8.12% !!!...and Mellon has increased their shares owned by 1.27%. I humbly submit that every company should have a CEO so inclined.

With respect to the second question, I have not been dumping. I have been trickling it out in a very specific way so as not to damage the market. I have also been selling most of the year so I have been selling at higher prices and at lower prices…. before, during and after news…I have done it in such a way that no one can infer anything from the decision to sell. Let’s put this into a better perspective:

During the period I last announced my intention to sell (August 31st I think) I sold ~7% of the total volume during that time...that’s 7,000 shares in a volume of 100,000…do you seriously think that is putting pressure on the stock? That does not include NASDAQ volume...if I include NASDAQ volume, the percent I sold is probably under 5%...Pleeeease…give a guy a break!

During the previous period when I announced my intention to sell (July 7th I think) I sold~ 5% of the total volume during that time...that’s 5,000 shares on a volume of 100,000… and again doesn’t include NASDAQ …if I include NASDAQ volume, the percent I sold is probably under 4% ….

If you consider the period when I first announced my intention to sell (January 14th I think) I sold~ 1.5% of the total volume during that time...that’s less than 1,500 shares on a volume of 100,000… and again doesn’t include NASDAQ …if I include NASDAQ volume, the percent I sold is probably under 1% ….

…need I continue…???

So, I respectfully submit that the sky is not falling because I am selling …unless of course you consider the manipulation of these facts by those who take pain staking measures to paint a bad picture of what we are doing and try and create a selling environment by counting on the fact that most investors don’t have the time to put it together…and there, my friend, is the hidden value for those that do REAL homework…what is really happening?

…and that takes me to another point: “what we are doing”. So, what have we done exactly? What have we done in the most recent months? Well, our job is to increase the value of the Company and, in my opinion, we have done a damn good job at doing just that. In the first 6 months of 2021, we posted revenues of ~14MM which is just short of the $18MM we posted for the full year 2020 (which was in and of itself an extraordinary increase from the ~$5MM in revenues from the year before) …not shabby eh? …and backlog of signed contracts is also very strong; $32 MM at last report. If that wasn’t enough, on top of that, since June 30th we announced over $28MM of contracts …$28MM !!!...which is over 150% of last year’s revenues, and twice of what we posted as our 6-month revenues this year! All announced since June 30th! Does anyone doubt that we have a much better company today than what we had at June 30th????

So, if you want to scream and shout and buy into short selling tactics…be my guest…you can’t fix stupid…I can innovate and bring great products to market with multi-billion-dollar companies, but I can’t fix stupid.

mjmj
1
To those that ask me how I am going to “fix” the falling stock price the answer is I don’t “fix” stock prices. My answer is to simply say that we will press release out of it, meaning: if we continue to perform as we have, and rack up success after success as we have, the stock takes care of itself. We are in it for the super bowl. Our strategy is to build a dynasty and we are doing that well, and those that get it will appreciate all we are doing, and hopefully reap the benefits.

In closing I would like to repost something I had posted previously on the same topic as the essence of it still stands, enjoy:

With respect to my selling shares, I cannot comment of what is happening with the stock price/short activity etc., but I do appreciate your concerns.

You suggest that I should sell only in an uptrend. Playing the devil’s advocate, I can see you or someone else asking me, if I did as you proposed, why sell in an uptrend and put a damper on the increasing share price…?

There is really no “good” time for someone like me to sell shares as the assumption usually is that when an insider such as me sells then it must be close to the top… I want to prove that assumption wrong when I sell shares at Pyro. If you look back, I have been selling shares at low stock prices as well as at high…as such one cannot infer future stock price based on my selling habits.

I also do not believe that I am putting pressure on the stock. I am also not selling large blocks all at once, but I am trickling it out slowly slowly. If and when I sell it is done respectfully and with a healthy view to market volumes. I hope you realize that if I sold the same volumes that I did recently, and assuming 220 trading days a year, it would take me over 8 years to sell everything I have.

You also suggest that I do a cross trade with a broker…this would be the kiss of death. Despite what everyone preaches the fact of the matter would is that as soon as a firm got wind that I wanted to do a cross the share price would be hammered (to set up the situation where they could purchase the block cheaper) …this type of activity is almost a given.

Last but not least, I am adding to my position. Net effect: I own more shares now than I did last December 31st (cannot recall the exact number). I am selling primarily to exercise warrants which were/are expiring…plus enough to pay taxes thereon. What would you have me do? Pay millions and millions of dollars on top of everything I have invested, and I am doing? If I did that you should run for the hills as that would not be financially prudent…and if that is how I ran my personal finances what would you say about how I ran the company’s finances?

Bottom line: I would do anything for this Company. We have proven ourselves time and time again. I have a vision and I follow it and it has created the Company we have today. I have not done it alone as we have assembled at PyroGenesis an extraordinary team without which I would be a no one. Together we have created a monster of a Company that is nailing it week after week.

Hope that Helps,

Peter
Bob de Bouwer 59
0
quote:

mjmj schreef op 30 oktober 2021 13:43:

Recent post van PP als antwoord op de vraag waarom hij aandelen heeft verkocht:

Dear All,

dank voor de info
voda
0
Bjarke Ingels Group Designs World’s largest 3D-Printed Community

Strategic Research Institute
Published on :
05 Nov, 2021, 5:39 am

Texan 3D-printing company Icon is working with American homebuilder Lennar and Danish architect Bjarke Ingels Group to create the world’s largest 3D-printed neighbourhood. The 100-home development in Austin will use Icon’s Vulcan construction system, capable of building 3,000 sq ft homes using the company’s proprietary walling system, which it says produces stronger and longer-lasting results than traditional building methods.

Jason Ballard, Icon’s chief executive, said: “Construction-scale 3D printing not only delivers higher-quality homes faster and more affordably, but fleets of printers can change the way that entire communities are built for the better. The US faces a deficit of approximately 5 million homes, so there is a profound need to swiftly increase supply without compromising quality, beauty, or sustainability, and that is exactly the strength of our technology.”

Martin Voelkle, a partner in BIG, said: “Additive manufacturing has the potential to revolutionise the built environment as it gets adopted by the industry at scale. By partnering with Icon and Lennar we are able to see this new technology roll out to the widest possible audience. The 3D-printed architecture and the photovoltaic roofs are innovations that are significant steps towards reducing waste in the construction process, as well as towards making our homes more resilient, sustainable and energy self-sufficient.”
Bijlage:
voda
0
ICON & Lennar to Build Neighbourhood of 3D Printed Homes

Strategic Research Institute
Published on :
09 Nov, 2021, 5:30 am

US’s leading homebuilders Lennar and construction technologies company pioneering large-scale 3D printing ICON announced a commitment to build the largest community of 3D-printed homes to date using ICON’s innovative robotics, software and advanced materials. Breaking ground in 2022, the 100-home community will be co designed by the acclaimed architecture firm, BIG-Bjarke Ingels Group.

The announcement deepens a relationship that began with Lennar’s investment in Austin-based ICON’s recent $207-million financing round and offers a promising path toward delivering affordable, technology-driven homes that meet rising demand.

ICON’s 3D printing technology produces resilient, energy-efficient homes faster than conventional construction methods with less waste and more design freedom – keeping construction projects on schedule and on budget. Designed and engineered from the ground up for volume 3D printing of homes with precision and speed, ICON’s Vulcan construction system can deliver homes and structures up to 3,000 square feet that are built to the International Building Code (IBC) structural code standard and expected to last as long or longer than standard Concrete Masonry Unit (CMU) built homes. ICON’s proprietary wall system and advanced materials are stronger and longer-lasting than traditional building materials and provide safer, more resilient homes that are designed to withstand extreme weather, greatly reduce the impact of natural disasters, and be printed at high speeds and at scale.
Bijlage:
voda
0
STRABAG & PERI Constructing 3D Printed Building in Australia

Strategic Research Institute
Published on :
15 Nov, 2021, 5:30 am

Austria’s first 3D-printed building is being constructed in Hausleiten, Lower Austria. Construction technology group STRABAG, together with PERI, the formwork and scaffolding manufacturer and a pioneer in 3D concrete printing, is realising a roughly 125 square meters office building next to its asphalt mixing plant in Hausleiten. The special dry mortar for the construction 3D printing project, with long workability and good pumpability, is being supplied by Lafarge.

Construction 3D printing offers several advantages where its use makes technical and financial sense. The COBOD BOD2 gantry printer used in Hausleiten can print concrete at up to one metre per second, which significantly shortens the construction time. The structural works for the building in Hausleiten can be completed in around 45 hours of pure printing time. Construction 3D printing also offers significantly more design freedom compared to classic concrete construction, with the possibility of easily creating architecturally complex rounded designs.

PERI is using the COBOD BOD2 gantry printer for the construction printing project in Hausleiten. This printing technology comes from Danish manufacturer COBOD, in which PERI acquired a significant stake in 2018.

The print head moves about three axes on a securely installed metal frame. This allows the printer to be moved to any position in the structure being built, requiring only a single calibration. The 3D printer applies the print material (dry mortar) in layers to create the walls. Laying down two parallel printing paths creates a hollow wall that is then backfilled with cast-in-place concrete as a load-bearing system. To create the outer wall, a second cavity is formed by printing another mortar path further outside the previous wall and filling this with thermal insulation material. The printed walls can be regarded as a kind of lost formwork system.

During the printing process, the printer already takes into account the water, electricity and other utility lines and connections that will be installed at a later point. The BOD2 is certified in such a way that work can also be carried out in the print room during the printing process. This allows manual work, such as the laying of pipes and connections, to be easily integrated into the printing process.

The printing material is stored in silos. The ready-to-use dry mortar is then pumped directly into the print head during the printing process after the addition of water. The Tector Print brand material used for printing the office building in Hausleiten was developed by Holcim and is adapted to the special requirements of 3D concrete printing.
Bijlage:
haas
0
schijnt dan toch te beuren: $33 miljoen ?
April 13, 2021
Materialise Acquires Option to Buy Link3D
Potential Acquisition to Accelerate Roadmap to Offer Cloud-based Access to Integrated Software Platform

LEUVEN, BELGIUM – April 13, 2021. Materialise, a global leader in 3D printing solutions, has acquired an option to buy Link3D Inc., an additive workflow and manufacturing execution systems (MES) company. The acquisition will extend Materialise’s ability to help companies gain control of their manufacturing floor as they scale up their additive manufacturing (AM) capability into volume production. In addition, the acquisition will allow Materialise to accelerate its roadmap to offer cloud-based access to its integrated software platform. It also is expected to broaden Materialise’s industrial customer base across North America, Europe and Asia Pacific, and offer Link3D customers a seamless connection to Materialise’s Magics 3D print suite.
6.208 Posts, Pagina: « 1 2 3 4 5 6 ... 285 286 287 288 289 290 291 292 293 294 295 ... 307 308 309 310 311 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Markt vandaag

 AEX
878,83  -3,44  -0,39%  30 apr
 Germany40^ 17.905,20 -0,15%
 BEL 20 3.883,26 -0,09%
 Europe50^ 4.901,63 -0,40%
 US30^ 38.043,99 0,00%
 Nasd100^ 17.570,06 0,00%
 US500^ 5.063,57 0,00%
 Japan225^ 38.318,54 0,00%
 Gold spot 2.324,98 +1,72%
 EUR/USD 1,0713 +0,40%
 WTI 81,58 0,00%
#/^ Index indications calculated real time, zie disclaimer

Aandelenadviezen van IEX.nl

  1. Premium
    Advieswijziging ASML
  2. Premium
    Iets langer geduld met Besi
  3. Premium
  4. Premium
    Uitbundige korting op het aandeel Exor
  5. Premium
    Logische herfinanciering Pharming

Stijgers

Corbion +2,70%
B&S Group SA +1,20%
Ahold Delhaize +1,17%
ForFarmers +1,04%
OCI +1,00%

Dalers

VIVORYON THER... -13,94%
EBUSCO HOLDING -5,50%
ACOMO -4,69%
Air France-KLM -4,29%
Arcadis -3,88%