Arcelor Mittal « Terug naar discussie overzicht

Nieuws en info hier plaatsen (deel 4)

35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 65 66 67 68 69 70 71 72 73 74 75 ... 1755 1756 1757 1758 1759 » | Laatste
voda
0
China daily steel output up by 5.86pct in late Feb

Reuters reported that China's crude steel output reached an average of 2.082 million tonnes per day over the February 21 to 28 period up 5.86% from the previous 10 days.

According to data from the China Iron and Steel Association, the total daily output based on production rates from its members, who produced an average of 1.804 million tonnes over the period up 6.82%.

Total steel output over the whole of February is expected to have reached 56.99 million tonnes down from 61.64 million tonnes in January. The daily rate in February stood at 2.035 million tonnes up from 1.988 million tonnes in January.

Source - Reuters
voda
0
Slowing China just part of the story on iron ore slump

Reuters reported that conventional thinking is that iron ore prices have plunged this year because of worries about China's economic growth outlook but it is possible the reverse is the case.

The 16% drop in spot Asian iron ore between February 17 and Monday is more than likely a cause of concern about China's economy, rather than a symptom of malaise in the world's biggest commodity consumer. While this sounds like a chicken and egg debate, if one views iron ore's decline, along with similar falls for copper, as raising concern about China, then looking at the dynamics behind the decrease in prices can be illuminating.

The reasons most often cited for iron ore's drop are a weakening steel demand growth outlook in China and an increase in available supply. There is truth in these arguments but they are far from complete explanations.
Prices may have further shortterm downside as inventories are sold off to repay financing

On the supply side, it's true that Australian miners have increased output, and more supply is expected in the next few years from both Australia and No2 exporter Brazil. But so far they have been able to sell all of their output, and while traders say the market is well supplied, there isn't much talk of significant oversupply driving down prices.

The China Iron and Steel Association said that on the demand side, China's steel output has recovered, rising 5.9% to 2.08 million tonnes a day in the last eight days of February from the preceding 10 day period. This is also up from the 2.07 million tonnes daily average for last year, showing that the output is still growing.

Steel inventories remain near record highs, although they have declined recently, dropping 5.9% to 16.3 million tonnes at major mills in the last week of February. The data suggests that iron ore demand should remain solid, and the risk of an unsustainable rise in steel inventories seems to be reducing, especially with the major construction season coming. So, why have iron ore prices fallen so sharply to put them down 20% now since the start of the year?

One likely explanation is the rapid rise in inventories at Chinese ports, which reached a record 105 million tonnes in the week to last Friday. Since the start of 2012 there has been a strong inverse correlation between iron ore inventories at Chinese ports and the spot price.

Recent reports suggest that the authorities are keen to crack down on this practice, and they also want to lower credit extended to uncompetitive steel mills in a bid to force a rationalisation of the overcapacity plaguing the sector. If this is the case, it does suggest that iron ore prices may have further short-term downside as inventories are sold off to repay financing.

The rationalisation of the steel industry is likely to be a positive for imports, though, as they tend to be of higher quality than domestic iron ore and offer better economics to more modern producers. Also, rationalisation of the steel sector is probably not as critical for iron ore demand as might be feared.

China plans to cut about 60 million tonnes of steel capacity by 2017, which is about 6 per cent of the more than one billion tonnes the industry can produce. Given steel output in China is forecast to rise some 3 per cent to 810 million tonnes this year, there is clearly room for much deeper cuts to get rid of inefficient capacity. Lower iron ore prices tend to force high-cost domestic miners to idle production, another positive for import volumes, if not prices.

Source - Reuters
voda
0
ArcelorMittal to invest USD 15 million in Brazil for special steel

ArcelorMittal is investing USD 15 million at its Brazil facility to produce specialised high strength steel for automotive industry by next year.

ArcelorMittal is investing around USD 15 million in the production of advanced high strength steel at its Vega do Sul flat steel rolling mill in the state of Santa Catarina in southern Brazil.

The plant's existing production lines will be equipped to produce Usibor, a press hardened boron steel with an aluminium silicon coating used mainly in the automotive industry. Using Usibor allows manufacturers to create lighter, safer and more environmentally friendly vehicles at an affordable cost.

With a strength of 1,500 MPa (Megapascal to show tensile strength) after hot-stamping, Usibor is one of the most resistant steels used in automotive applications, used mainly for the production of structural parts including A-pillars, B-pillars, frontal and rear bumpers, various types of rails, and the tunnel floor.

Usibor has been imported from ArcelorMittal plants in Europe into Brazil since 2012; production in ArcelorMittal Vega do Sul is due to start in the second quarter of 2015. Hot rolled coils will continue to be produced at ArcelorMittal Tubarao in Espirito Santo, Brazil, and the patented aluminum silicum coating will be applied at ArcelorMittal Vega do Sul.

The USD 15 million investment is in line with the Brazilian government's Inovar Auto stimulus programme, which seeks to encourage auto makers to invest in the Brazilian automotive industry and to produce more efficient, safer, and technology-advanced vehicles.

Source - Strategic Research Institute
voda
0
ArcelorMittal USA Plate helps give NY Tappan Zee Bridge project

ArcelorMittal USA is playing a major role in a significant national infrastructure initiative by supplying high performance plate steel for the New NY Bridge project to upgrade the current Tappan Zee Bridge. The project is the largest transportation design build project to date in the United States and one of the largest construction contracts in New York history.

All three ArcelorMittal USA Plate Mills Burns Harbor, Coatesville and Conshohocken are supplying high performance steel (HPS70W) to two of the projects’ major steel fabricators, High Industries and Hirschfield Industries Bridge for bridge and girder fabrication. A significant amount of Burns Harbor material was also supplied to Berg for the bridge pilings earlier in 2013. In total, the amount of ArcelorMittal plate that will ultimately be supplied for the project is about 160,000 tonnes.

Mr John Battisti COO of ArcelorMittal USA Plate said that “We are very pleased to have been selected to provide our high performance plate material for this major, historic infrastructure project. Our USA plate team has been keenly involved in weekly meetings with our customers on the planning, development and delivery of these plate products, to ensure they are pleased with our performance during all phases of the project.”

Mr Roger Ferch president of the American Institute of Steel Construction said that “The award of the Tappan Zee structural steel contract to the team of fabricators High Steel Structures Inc. and Hirschfeld Industries with material supply by ArcelorMittal USA, validates the fact that the United States steel construction industry has the capacity, capability and collaborative spirit to meet our nation’s infrastructure needs.”

Mr Jayne Atherton division manager, order fulfillment and customer service, plate, ArcelorMittal USA said that “We are in the very early stages of supplying material for this project. Delivery performance will be critical, as there is high visibility for this ‘buy American’ fabricated project. We were awarded the business because of the proximity of our Eastern plate mills to the fabrication location, and due to the longstanding favorable business relationships with both fabrication companies.”

He said that “We have unique combined capabilities at all three of our plate facilities to supply 100% of the plate product lighter gauge plate from Conshohocken wide and heavy plate from Coatesville and long quench and temper plate from Burns Harbor. This capability combination is unavailable anywhere else in the world and really sets us apart from our competitors.”

Source - Strategic Research Institute
voda
0
Worst is over for economy as well as the steel sector - Mr Verma

Business Line reported that with steel industry going through a subdued growth phase due to delays in executing infrastructure projects, the scenario looks quite uncertain. However, Steel Authority of India Limited is continuing with its massive expansion plan and predicts that demand, not only in India but all over the globe, will start picking up in the next few months.

Mr CS Verma CMD of SAIL spoke to The Hindu about the company’s plans and outlook.

Q - Steel demand in the country has remained subdued from some time. What is the scene now and have you revised your expansion plan in view of the same?

A - At the outset, I must state that the worst is over for the economy as well as the steel sector. Our expansion plans are based on the prospect for the steel sector in India defined over medium to long term. There is little reason to revisit that because of temporary sluggishness in the market. We feel that the larger story of India and the steel sector remains intact. In fact, we are going ahead with the next phase of expansion, which will take our capacity to 50 million tonne by 2025. In the next 3 to 4 years, India is set to emerge as the second biggest consumer and producer of steel.

Q - How do you see this ongoing modernisation programme help the bottomline of SAIL?

A - The objective of our ongoing modernisation is fourfold, volume expansion, infusion of new technologies along with phasing out of obsolete ones, enrichment of product mix and capacity expansion/modernisation of captive mines for input securitisation. All these would help improve the top and bottom lines. Modernisation is being carried out simultaneously in all the steel plants of SAIL with an investment of around INR 72,000 crore. Investments of around INR 6,300 crore are being made for pollution abatement and waste energy recovery systems. We are also bringing in a number of new products. One such product is long rails from new Universal Rail Mill at Bhilai Steel Plant to cater to the demand of Indian railways. With this, the percentage of value-added products would increase from 42% to 55%.

Q - How do you see the infrastructure sector in the coming years, especially as steel demand depends a lot on growth of this sector?

A - The Indian economy holds enough promise for the future. In steel usage, for instance, consumption is only 59 kg per capita per annum as against the world average of 225 kg. Even a modest steel consumption growth of 7% to 8% will result in additional demand of around a 100 million tonne by 2025 to 2026. In 2002 to 2012, the growth in steel consumption in India was near double digit. The government has reiterated its commitment towards investment of USD 1 trillion in infrastructure during the XII Plan. This augers well for the steel industry.

Q - Do you see 2014 as a year when things will change for the better, both in exports and domestic production and consumption?

A - Signs of recovery are already evident. There has been a pick up in exports and some of the products which had experienced a demand slump are experiencing a demand growth. At the global level, 2014 should see recovery of demand in Europe and the US. It is projected that world steel consumption could grow at around 3 per cent and India’s at around 5 per cent, signalling a demand recovery.

Q - Could you throw some light on the acquisition of coking coal assets and iron ore mines abroad on your own or through International Coal Ventures and is this the right time to buy?

A - International Coal Ventures Limited is at present engaged in carrying out due diligence of some promising coal mines and assets in the US and Mozambique. One of the impediments faced in acquiring a coking coal mine abroad has been the high level of volatility in prices. Consequently, there has been a wide fluctuation in the value of assets. The current market conditions are favourable for making an acquisition. I am hopeful of ICVL making an acquisition shortly. We are also very positive of our progress in Afghanistan and we are awaiting a positive signal from the government there on our proposal for setting up a steel plant and mining projects.

Q - How badly has the halt of mining activity in India and are you gearing up to import and what quantity?

A - Stopping of mining activity in India has led to issues in availability of iron ore for the steel industry. This, in the recent past, had impacted production of plants dependent on purchased iron ore. However, SAIL sources 100% of iron ore from its captive mines and is not impacted by the slowdown in domestic iron ore mining.

Source - Business Line
voda
0
India has potential to be net exporter of steel - Mr Sajjan Jindal

Business Standard cited Mr Sajjan Jindal CMD of JSW Steel as saying that though India's demand supply equation for steel is almost balanced at present at about 80 million tonne, going ahead the country has the potential to become a net exporter of the alloy.

Mr Jindal said that "India has the 5 main 'M's that is manpower, money, mineral resources, machine and market which can make it a 300 million tonne per annum capacity by 2025. Thus the country possesses the potential to become a net exporter in coming years. As the industry becomes more and more mature I see more value added products being exported. In FY14, India has become a large exporter for steel. This is a very positive thing for the industry."

He said that “Under the guidance of the steel ministry, the industry players are currently engaged in drawing up a plan to meet this national goal of 300 million tonne by 2025. Now that we (the industry) have the goal set it is important that the 5 'M's move in the same direction which is not the case at present."

Mr Jindal said that “Thrust will be laid on bringing new technologies and innovation will be encouraged. There is also a plan to set up a research and development centre which will bring out innovative tools for the industry. Currently the plan to set up an R&D centre is on the drawing board but we will soon come up with a concrete plan.”

He said that “While we have set the goal for 300 million tonne per annum capacity by 2025, we do see several negatives on the way which one can say are the curses of development. But these negatives can surely be mitigated and development can happen even keeping environment and other aspects in mind."

Source - Business Standard
voda
0
Indian steel makers expect surge in imports

Economic Times reported that domestic steel makers are expecting a surge in import of steel and steel items in the country after the government eased import norms for the two products.

A senior executive at a leading steel maker said requesting anonymity, that "While subdued demand at home has made us look at exports, a rise in imports will once again disturb the demand supply balance. The move may benefit auto and consumer durables makers.”

The Directorate General of Foreign Trade has allowed steel exporters to India to provide quality certification from any international standard certifying body, toning down its earlier policy that mandated certification from only a recognised body in the product's country of origin.

Source - Economic Times
voda
0
Cheaper HR Plates from China substitute slab imports in Europe

It is learnt that due to aggressive offers of HR Plates from China the slab sales have suffered recently in Europe.

Some of the Italian plate producers have stopped buying slabs and are buying HRP from China as the price is almost the same.

Now a days slabs can be bought at about USD 540 to 550 per tonne CFR FO. Plates from a first class Chinese Mill can be bought at no more than USD 570 per tonne basis CFR FO.

Obvious that re-rollers are buying plates in the range of 10 to 40 mm (a range usually without size extra) and integrating their stock by producing plates of higher thickness for which can ask some extra.

Recent information about price increases is without any ground. The real situation is that price is still quite low (Euro 450-460 per tonne) and extremely erratic, mainly determined by the buyer’s strength.

If the buyer is a financially strong company, i.e. can give real guarantees of payment, is in condition to dictate the price.

Source - Strategic Research Institute
voda
0
ArcelorMittal SA downgraded to underperform at Credit Suisse

ArcelorMittal SA was downgraded by equities researchers at Credit Suisse to an underperform rating in a research report issued on Friday.

Credit Suisse said that for US Steel to become even more competitive, the company would need to outperform peers on cost reductions, yield enhancements, productivity gains or whatever else the process may involve.

Mr Nathan Littlewood analyst of Credit Suisse said that “As we mentioned earlier; equity prices (particularly US Steel) seem to be overlooking recent commodity price weakness as a short term destock related phenomenon. This is perhaps not surprising given that the 2012 collapse of iron ore to USD 87 per tonne and subsequent rebound to USD 160 per tonne is still relatively fresh in our minds. Unlike 2012 however, we believe that structural changes to the global ferrous S/D balance through the middle of the year will see commodity prices settle at a lower level in H2 2014 than they did post the 2012 destock shock.”

Source - Mideasttime.com
voda
0
Aperam benoemt nieuwe divisiedirecteur

AMSTERDAM (Dow Jones)--Aperam sa (056997440.LU) benoemt Frederic Mattei als de nieuwe chief executive van de divisie legeringen en specialties en lid van het management committee van het concern, zo maakt de producent van roestvaststaal maandag bekend.

Mattei treedt per 1 juni aan in zijn nieuwe functie en zal rapporteren aan Philippe Darmayan, de CEO van Aperam. Eerder werkte Mattei voor onder meer ArcelorMittal (MT.AE) en Salzgitter Group.

Door Ben Zwirs; Dow Jones Nieuwsdienst; +31 20 571 52 00; ben.zwirs@wsj.com

voda
0
Chinese banks cut loans to steel sector

Growing jitters about the financial health of bloated mainland industries have prompted many banks to cut lending in these sectors by as much as 20%.

Banking and industry sources said that at the same time, the China Banking and Regulatory Commission has called on banks to submit their regular report of outstanding loans owed by various sectors but has asked them to include loans linked to derivative products and debt financing.

The inclusion of these two areas is a new development. The move, which comes in the wake of a landmark corporate bond default by Chaori Solar Energy Science & Technology as well as the default of a coal related high yield trust product, underscores the regulator's concerns about financial risks posed by heavily indebted sectors, such as steel makers and shipbuilders.

Bank source said that the specific sectors to be audited are steel, cement, aluminium smelting, flat glass and shipbuilding. It was not clear what derivatives lending or debt financing the CBRC was focusing on. But one area of concern may be bank lending to clients who used commodity imports such as steel or copper as collateral.

The CBRC has not set any targets for a reduction in lending, but banks started to cut loans to struggling sectors late last year. Some steel mills received letters from their banks this month telling them that their 2014 credit limit would be 20 per cent below the amount they borrowed in 2013.

Source – SCMP.com
voda
0
SAIL plans to expand to 50 million tonnes - Report

Times of India reported that setting the hot metal production target to 17 million tonnes for 2014, the Steel Authority of India Limited is set to catch up with the government's steel vision for 2025, which envisions the annual crude steel production to touch the 300 million tonne mark from the present 90 million tonne per annum.

Mr CS Verma CMD of SAIL said that "To achieve the 300 million tonne per annum target by 2025, SAIL will increase its annual production to 50 million tonne per annum. The target for calendar year 2014 is around 12% to 14% higher than the present production. Achieving the target set for 2025 is a daunting task requiring huge investments and mobilization of funds.”

Mr Verma said that "We have no plans to come up with new plants, but the process of capacity expansion of the existing seven state owned units will continue in a phased manner, the Rourkela Steel plant, ISCO Burnpur and Bhilai Steel Plant have already been revamped.”

He said that "Once the present modernization and capacity enhancement programme is accomplished, SAIL will have 24 million tonne per annum production capacity, thereby requiring another 26million tonne per annum capacity addition in the next 12 years."

Mr Verma said that "By the time we achieve 25 million tonne per annum production, the requirement of iron ore would be 42 million tonne per annum. Whereas by the time our production reaches 50 million tonne per annum, the requirement for ore would be around 80 to 85 million tonne per annum for which sufficient reserves are present."

Source – Times of India
[verwijderd]
1
quote:

voda schreef op 16 maart 2014 15:59:

ArcelorMittal SA downgraded to underperform at Credit Suisse

ArcelorMittal SA was downgraded by equities researchers at Credit Suisse to an underperform rating in a research report issued on Friday.

Volgens mij gaat deze downgrade over US Steel en niet over Arcelormittal. Gaarne double check.
[verwijderd]
0
Credit Suisse Bends U.S. Steel, Downgrades to Underperform
By Erika Janowicz
March 14, 2014 11:52 AM
Benzinga

In a report published Friday, Credit Suisse research analyst Nathan Littlewood downgraded United States Steel Corp. (NYSE: X) from Neutral to Underperform.

Littlewood noted that United States Steel Corp. has outperformed international peers including Tata Steel and ArcelorMittal (NYSE: MT). The analyst remarked that the company's outperformance is likely due to EM/DM exposure trade, but investors should note that this gap will close "at some point." Credit Suisse added that for US Steel to become even more competitive, the company would need to outperform peers on "cost reductions, yield enhancements, productivity gains or whatever else the process may involve."

Nathan Littlewood further commented on equity prices. He reported, "As we mentioned earlier; equity prices (particularly US Steel) seem to be overlooking recent commodity price weakness as a short-term destock related phenomenon. This is perhaps not surprising given that the 2012 collapse of iron ore to $87/t and subsequent rebound to $160/t is still relatively fresh in our minds. Unlike 2012 however, we believe that structural changes to the global ferrous S/D balance through the middle of the year will see commodity prices settle at a lower level in 2H2014 than they did post the 2012 destock shock."

Credit Suisse hold an unchanged $19.00 price target on United States Steel.

Shares of United States Steel Corp. closed at $24.40 on Thursday and are currently trading at $23.88, down 2.13 percent.
voda
0
SAIL aiming for 1 million tonnes steel export in 2014-15

Business Standard reported that buoyed by nearly 30% rise in exports in 2013-14, Steel Authority of India Limited aims to more than double the shipments to 1 million tonne next fiscal docking special quality products from its expanded capacity.

SAIL, which has been largely catering to domestic market instead of pushing exports, started overseas shipments vigorously since the beginning of the current fiscal to tide over the subdued demand at home and arrest the impact of the rupee's fall against the US dollar.

A company official said that this has yielded results with exports clocking nearly 30% growth at 0.475 million tonnes in the current fiscal over last fiscal and going by the momentum, we hope to achieve 1 million tonne exports next fiscal.

During 2013-14, SAIL's export basket consisted of wire rods, HR coils, CR coils, stainless steel and billets & blooms to around 18 countries including Saudi Arabia, Canada, Indonesia and Vietnam. The basket got bigger with the company commencing exports of slabs produced by its Rourkela Steel plant. Plates from the Bhilai plant were also exported directly to project customers in SE Asia for the first time.

The export product mix in 2014 to 2015 will be qualitatively enriched with special quality products coming from the newly commissioned mills at ISCO Steel Plant and Bokaro Steel Plant.

Source – Business Standard
voda
0
quote:

AMG1 schreef op 18 maart 2014 15:56:

[...]

Volgens mij gaat deze downgrade over US Steel en niet over Arcelormittal. Gaarne double check.
Héél erg goed opgemerkt! AB erbij!

Een andere link erbij!!

blogs.barrons.com/stockstowatchtoday/...

www.benzinga.com/analyst-ratings/anal...
g.raaier
0
Steel stocks gain as ArcelorMittal price hike outweighs Nucor guidance • 3:21 PM
•Steel stocks are higher despite Nucor's (NUE +0.8%) disappointing guidance, which apparently was more than offset by price increases at ArcelorMittal (MT +1.3%) as mills try to stem the downtrend in prices during the past two months.
•Nomura lowers its Q1 earnings estimates for steel stocks ahead of mid-quarter updates from NUE, mini-mill peer Steel Dynamics (STLD +1.5%) and AK Steel (AKS +6%), which are expected within the coming week, but the firm continues to positively view stock performance in the sector going forward.
•Also: X +5.3%, TX +3.1%, SCHN +2.4%, CMC +2.1%, GGB +1.8%, RS +1.8%.

blogs.barrons.com/stockstowatchtoday/...

www.amm.com/Article/3320375/Steel/Sev...
voda
0
Personeel ArcelorMittal Gent staakt

WOENSDAG 19 MAART 2014, 13:16 uur | 213 keer gelezen

GENT (AFN) - Het voltallige personeel van ArcelorMittal's fabriek in Gent staakt vanaf woensdagochtend 5.50 uur. Dat meldde het Belgische persbureau Belga. De onderhandelingen over een nieuwe cao liepen opnieuw op niks uit.

Vorige week donderdag werd al voor de tweede keer in 2 weken een ontwerp-cao verworpen. De betrokken vakbonden en de directie van ArcelorMittal bevestigden stelden tegenover Belga dat er geen nieuw onderhandelingsmoment is afgesproken.
voda
0
AMG blijft last houden van lagere metaalprijzen

AMSTERDAM (Dow Jones)--AMG Advanced Metallurgical Group nv (AMG.AE) heeft in het vierde kwartaal een vrijwel ongewijzigd nettoverlies behaald als in dezelfde periode een jaar eerder omdat de daling van de metaalprijzen doorzette, maar verwacht dit jaar een verbetering van de winst.

Het nettoverlies kwam uit op $3,2 miljoen ten opzichte van $3,3 miljoen in de laatste drie maanden van 2012. De winst per aandeel bleef gelijk op $0,12. De operationele winst (EBITDA) daalde tot $10,5 miljoen van $19,2 miljoen.

"De markten voor speciale metalen hadden te maken met aanzienlijke prijsdalingen gedurende het vierde kwartaal van 2013, wat een voortzetting was van de sterke dalingen in het derde kwartaal", zei Chief Executive Heinz Schimmelbusch van het bedrijf woensdag in reactie op de resultaten.

De nettoschuld kwam eind december uit op $103,1 miljoen, wat betekent dat gedurende 2013 de schulden met $33,7 miljoen zijn verlaagd.

De omzet steeg in het vierde kwartaal naar $284 miljoen van $275 miljoen.

AMG stelt dat voorraadafbouw plaatsvindt in de wereldwijde lucht- en ruimtevaartindustrie, de vraag naar 'high performance' staal laag is en de groei in China afneemt, maar dat deze omstandigheden wel tekenen van stabilisatie vertonen. Desondanks blijven de staalprijzen laag en is er sprake van overcapaciteit. Vooruitkijken verwacht het management desalniettemin dit jaar een stijging van het EBITDA en het netto-resultaat ten opzichte van 2013.

Over het gehele jaar was sprake van een nettoverlies van $41,5 miljoen, tegenover een nettowinst van $2,8 miljoen in 2012. De EBITDA daalde met 13% tot $72,6 miljoen en de omzet steeg 5% tot $1,16 miljard.

Het aandeel is dinsdag gesloten op EUR7,31.

Door Levien de Feijter; Dow Jones Nieuwsdienst: +31-20-5715200; levien.defeijter@wsj.com


voda
0
Weer een positieve analist over Arcelor:

3 speculatieve aandelen met koerspotentie

WOENSDAG 19 MAART 2014, 08:30 uur | 7288 keer gelezen

Als we kijken naar aandelen die genoteerd zijn aan de Amsterdamse beurs, is er een aantal aandelen dat de laatste maanden toch wel onder druk staat. Dat stelt aandelenanalist Tom Muller van Theodoor Gilissen tegenover Belegger.nl. Deze aandelen hebben volgens hem in ieder geval genoeg potentie om te stijgen.

De speculatieve aandelen die Muller selecteert zijn SBM Offshore, ArcelorMittal en Imtech.

ArcelorMittal

‘Naar ArcelortMittal kijk ik op de langere termijn. Ook dit aandeel is flink naar beneden gekomen de laatste 1,5 week. Bij Arcelor zat je op de 12,30 euro en daar is nu meer dan 10 procent vanaf. Dat heeft te maken met het feit dat ze een fabriek in Oekraïne hebben, maar die pakt niemand ze natuurlijk af.’

‘Ik denk dat ArcelorMittal fundamenteel te veel is gezakt de laatste weken. Het gaat bij dit aandeel om een terugkeer van het vertrouwen. Als het gejank eenmaal uit de markt gaat, zal blijken dat er uiteindelijk niets is gebeurd.’

Voor de rest, zie link:

www.belegger.nl/beurstips-en-handelsk...

PS:

Waarom plaats niemand dit nieuws hier? Het bericht is al meer dan 7000 ! keer gelezen!
35.173 Posts, Pagina: « 1 2 3 4 5 6 ... 65 66 67 68 69 70 71 72 73 74 75 ... 1755 1756 1757 1758 1759 » | Laatste
Aantal posts per pagina:  20 50 100 | Omhoog ↑

Meedoen aan de discussie?

Word nu gratis lid of log in met uw e-mailadres en wachtwoord.

Direct naar Forum

Detail

Vertraagd 17 jun 2024 13:49
Koers 21,650
Verschil -0,170 (-0,78%)
Hoog 21,910
Laag 21,480
Volume 1.176.605
Volume gemiddeld 2.688.328
Volume gisteren 4.153.452